Altronix Managed NAC Power Extender FIRESWITCH108
Manufacturer: Altronix
Mfg Number: FIRESWITCH108
SKU:
Condition:
New
UPC: 782239946723
Specifications
Product Type | Alarm Control Panel Expansion Module |
---|
Brand Name | Altronix |
---|
Manufacturer | Altronix Corporation |
---|
Product Model | FIRESWITCH108 |
---|
Product Name | FireSwitch108 Managed NAC Power Extender |
---|
Manufacturer Part Number | FIRESWITCH108 |
---|
Manufacturer Website Address | http://www.altronix.com |
---|
Packaged Quantity | 1 |
---|
Environmentally Friendly | Yes |
---|
Environmental Certification | RoHS |
---|
Country of Origin | United States |
---|
Height | 15.5" |
---|
Width | 12.3" |
---|
Depth | 4.5" |
---|
Weight (Approximate) | 12.39 lb |
---|
Device Supported | Control Panel |
---|
Limited Warranty | Lifetime |
Description
The Altronix FireSwitch108 is a cost effective managed NAC Power Extender. It interfaces with 12 or 24VDC Fire Alarm Control Panels (FACP) to provide Notification Appliance Circuit expansion support, for additional horns/strobes to allow ADA compliancy. It also provides auxiliary power to support system accessories. It delivers electronically regulated and filtered 24VDC power to Class B or Class ANAC loop circuits. Additionally, a separate 1 amp auxiliary output for 4-wire smoke detectors is available. Alarm current can be divided between the eight (8) outputs for powering NAC devices. Outputs are rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble, the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble output terminals [NC, C, NO] which are used to indicate general loop/system trouble. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the eight (8) outputs. It provides a programmable LCD display interface, plus an ethernet port interface for remote programmability and monitoring.