StarTech.com 40-Pin IDE PATA to SATA Adapter Converter for HDD/SSD/ODD IDE2SAT2

Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard. The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard. The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard. The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.

Product Type	IDE to SATA Adapter
Brand Name	StarTech.com
Manufacturer	StarTech.com
Product Name	40-Pin IDE PATA to SATA Adapter Converter for HDD/SSD/ODD
Manufacturer Part Number	IDE2SAT2
Manufacturer Website Address	http://www.startech.com
Environmentally Friendly	Yes
Environmental Certification	RoHS
Package Contents	40-Pin IDE PATA to SATA Adapter Converter for HDD/SSD/ODD 1 x LP4 Molex to SP4 Power Cable 1 x Instruction Manual
Additional Information	Chipset ID: Marvell - 88SA8852 1 x IDE (40 Pin; EIDE/PATA) 1 x SATA Data & Power Combo (7+15 pin) 1 x SP4 (4 pin; Small Drive Power) Maximum Data Transfer Rate: 133MB/sec Product Length: 75.5 mm Support for 48-bit Logical Block Addressing (LBA) Supports 2.5", 3.5", and 5.25" SATA Drives
Height	0.9"
Width	0.8"
Weight (Approximate)	0.53 oz
Limited Warranty	2 Year