Axiom 10FT CAT6A 650mhz Patch Cable - TAA Compliant AXG95822

High quality Category 6A (CAT6A) patch cables are the solution to your internetworking needs. With speeds of up to 650MHz you can connect to your 10GBASE-T LAN/WAN segments and networking gear at maximum speed. Also, with its superior connector you get a cable that is built for speed and endurance. Axiom Cat6A cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire, making them fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in Cat6A communications cables. Conductor: 4-pair (UTP) 24 AWG stranded copper Connector: 50 micron gold-plated RJ45 Supports 10GBASE-T Jacket: PVC Standard: Category 6A IEEE 802.an; TIA 568-C.2; UL®, ETL Tested Molded Rubber Boots with Strain Relief RoHS Compliant Tested up to 650MHz Jacket Diameter: 6.9 +/- 0.15mm Min Avg. jacket Thickness: 0.58mm Backward Compatible with Cat 6, Cat 5 & Cat 5E Networks Available in all lengths from 1ft-100ft Colors: K= Black, B= Blue, G=Gray, N=Green, O=Orange, P= Purple, R= Red, W=White, Y= Yellow

Product Type	Network Cable
Brand Name	Axiom
Manufacturer	Axiom Memory Solutions
Product Name	10FT CAT6A 650mhz Patch Cable - TAA Compliant
Manufacturer Part Number	AXG95822
Manufacturer Website Address	http://www.axiommemory.com
Environmentally Friendly	Yes
Environmental Certification	RoHS
Cable Characteristic	Patch Cable
Connector on First End	1 x RJ-45 Male Network
Connector on Second End	1 x RJ-45 Male Network
Cable Type	Category 6a
Connector Plating	Gold Plated
Features	MoldedBootedStrandedStrain Relief
Data Transfer Rate	1.25 GB/s
Device Supported	Network Device
Cable Length	10 ft
Limited Warranty	Lifetime