Omnitron Systems FlexPoint GX/T 10/100/1000 Copper to 100/1000X Fiber Ethernet Media Converter 4710-0

The FlexPoint GX/T is a 10/100/1000BASE-T copper to 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes. The GX/T features Small Form Pluggable (SFP) transceivers that support both 100BASE-FX and 1000BASE-X for interoperability with Gigabit and Fast Ethernet fiber equipment. SFP transceivers enable adaptability to different fiber types, speed and distances, and support Coarse Wave Division Multiplexing (CWDM) wavelengths. The FlexPoint GX/T also supports ST, SC and LC; and fixed fiber connectors for multimode, single-mode fiber; and single-mode single-fiber models are available. Both the fiber port and the RJ-45 port support auto-negotiation to achieve the best possible mode of operation (speed, duplex mode and Pause mode) between the devices. The auto-negotiation feature can be disabled on both ports (for manual configuration) using DIP-switches on the product. This is useful in a situation where the GX/T is connected to a non-negotiating device and the configuration parameters must be set manually. Network flow control is managed by the Pause function (configured via auto-negotiation or manually) that prevents network congestion on both the RJ-45 and fiber ports. When Pause is enabled and the device is experiencing network congestion, it will send out a Pause signal to its link partner, instructing it to slow down data transmission. A variety of testing and fault detection tools are provided for easy installation and troubleshooting. The GX/T supports Port Loop-Back, IEEE defined Far-End-Fault and Link Fault bit as Remote Fault indicators. The GX/T generates a remote fault indicator when it detects link fault conditions, and reports detection of these signals by displaying status on the LED. Through user DIP-switch configuration, the detection of these indicators or link modes can also be propagated to the other port on the GX/T as a means of notifying connected end-devices of the link fault. Diagnostic status LED indicators assist in network installation and maintenance. The LEDs report the availability of power, port activity and link status and duplex mode. The GX/T supports a wide input voltage range of 5 to 32VDC for flexibility to power the device from a variety of sources. GX/T modules can be standalone or surface-mounted utilizing optional wall-mounting hardware or DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant chassis.

Number of Network (RJ-45) Ports	1
Network (RJ-45)	Yes
Number of SC Ports	1
Total Number of Ports	2
SC Port Type	Duplex
Product Type	Transceiver/Media Converter
Manufacturer Part Number	4710-0
Manufacturer Website Address	http://www.omnitron-systems.com
Manufacturer	Omnitron Systems
Product Model	4710-0
Product Name	FlexPoint GX/T 10/100/1000 Copper to 100/1000X Fiber Ethernet Media Converter
Product Line	FlexPoint
Product Series	GX/T
Brand Name	Omnitron Systems
Maximum Distance Supported	12.43 Mile
Fiber Optic Cable Standard	9/125 µm
Media Type Supported	Twisted Pair Optical Fiber
Fiber Mode Supported	Single-mode
Fiber Optic Wavelength	1310 nm 1550 nm
Country of Origin	United States
Environmentally Friendly	Yes
Environmental Certification	WEEE REACH RoHS 2
TAA Compliant	Yes
Network Technology	10/100/1000Base-T 1000Base-X 1000Base-FX
Ethernet Technology	Gigabit Ethernet
Weight (Approximate)	6 oz
Form Factor	Rail-mountable Wall Mountable Rack-mountable Tabletop
Height	1"
Width	3"
Depth	4"
Power Source	AC Adapter
Limited Warranty	Lifetime