Omnitron Systems OmniConverter FPoE/SL Transceiver/Media Converter 9343-1-19Z

The OmniConverter FPoE/SL, FPoE/S and FPoE+/S are multiport media converters that convert 10/100BASE-T copper to 100BASE-X fiber and support Power-over-Ethernet (PoE and PoE+). Classified as Power Sourcing Equipment (PSE), they provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data. The OmniConverter FPoE/SL is a cost-effective media converter that provides up to 15.40W PoE (IEEE 802.3af) per RJ-45 port and supports frame sizes up to 2,000 bytes. The OmniConverter FPoE/S provides up to 15.40W PoE (IEEE 802.3af) per RJ-45 port and supports frame sizes up to 10,240 bytes. The OmniConverter FPoE+/S provides up to 34.20W PoE+ (IEEE 802.3at) per RJ-45 port and supports frame sizes up to 10,240 bytes. The FPoE+/S powers the more demanding PDs such as outdoor PTZ (pan-tilt-zoom) cameras and multi-band, multi-stream wireless access points. Models with two fiber ports support redundant fiber optic uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to cascade multiple media converters, or it may be used as another switch port. Configurable features include link modes and a PoE power reset function that enables a PD device to be re-initialized remotely. When a problem with a PD is identified, the fiber port on a managed switch can be shut down or disconnected, enabling the PoE power reset function on the OmniConverter. The PoE power to the PD is disabled for 2 seconds when a loss of receive fiber link is detected by the OmniConverter, eliminating the need for costly truck rolls to remote PD sites. Link modes can be configured to propagate loss-of-link faults to managed devices, immediately notifying administrators of network outages. OmniConverter media converters support fixed-fiber connectors and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. They support multimode and single-mode dual fiber; and single-mode single-fiber, in standard and CWDM wavelengths. The compact standalone OmniConverter media converters can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19" rack-mount shelf. They are available with DC power input via terminal connectors or external 100 to 240V AC power adapters.

Product Type	Transceiver/Media Converter
Product Series	FPoE/SL
Brand Name	Omnitron Systems
Manufacturer	Omnitron Systems
Product Model	9343-1-19Z
Product Name	OmniConverter FPoE/SL 9343-1-19Z Transceiver/Media Converter
Product Line	OmniConverter
Manufacturer Part Number	9343-1-19Z
Manufacturer Website Address	http://www.omnitron-systems.com
Environmentally Friendly	Yes
Environmental Certification	RoHS 2WEEEREACH
Fiber Optic Cable Standard	9/125 µm
Media Type Supported	Twisted PairOptical Fiber
Fiber Mode Supported	Single-mode
Fiber Optic Wavelength	1310 nm
Maximum Distance Supported	18.64 Mile
Ethernet Technology	Fast Ethernet
Network Technology	100Base-X10/100Base-T100Base-BX
USB	No
DVI	No
Number of Network (RJ-45) Ports	1
Network (RJ-45)	Yes
Management Port	No
Number of SC Ports	1
Total Number of Ports	2
PoE Port Type	PSE
Height	1"
Width	4.5"
Depth	6"
Form Factor	Rack-mountableStandaloneRail-mountableWall MountableDesktopExternal
Weight (Approximate)	1.10 lb
Power Source	Power Supply
Limited Warranty	Lifetime