Omnitron Systems OmniConverter GPoE+/SX 4x PoE+ 2x LC Single-Mode 12km US AC Powered 9447-1-241 9447-1

The OmniConverter GPoE+/SX is a multi-port media converter that converts 10/100/1000BASE-T copper to 1000BASE-X or 100BASE-X fiber, and support Power-over-Ethernet (PoE and PoE+). OmniConverter PoE media converters provide network distance extension with fiber cabling, and function as PoE injectors providing power to four Powered Device (PDs) over standard UTP cables that carry the Ethernet data. The GPoE+/SX provides up to 34.20W PoE+ (IEEE 802.3at) per RJ-45 port and supports frame sizes up to 10,240 bytes. Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to cascade multiple media converters, or it may be used as another switch port. Configurable features include Directed Switch Mode, MUX Mode, Dual PoE Device Mode and a PoE power reset. When configured in Directed Switch Mode, video multicast traffic is only forwarded to the fiber uplink (Port 1), preventing the multicast video traffic from flooding other network ports. MUX Mode allows the data traffic to be tunneled between two GPoE+/SX converters. The RJ-45 data traffic on one module will be mirrored to the corresponding RJ-45 on the other module. The dual fiber port models can be configured in Dual PoE Device Mode. When configured, the GPoE+/SX operates as two separate PoE media converters, providing two separate fiber uplink ports to the same location. PoE power reset enables a PD device to be re-initialized remotely. When a problem with a PD is identified, the fiber port on a managed switch can be shut down or disconnected, enabling the PoE power reset function on the OmniConverter. The PoE power to the PD is disabled for 2 seconds when a loss of receive fiber link is detected by the OmniConverter, eliminating the need for costly truck rolls to remote PD sites. OmniConverter media converters support fixed-fiber connectors and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. They support multimode and single-mode dual fiber; and single-mode single-fiber, in standard and CWDM wavelengths. The compact OmniConverter media converters can be wall mounted or DIN-rail mounted using an optional mounting clip. They are available with DC input power via terminal connectors or external 100 to 240V AC power adapters.

Product Type	Transceiver/Media Converter
Product Series	GPoE+/SX
Brand Name	Omnitron Systems
Manufacturer	Omnitron Systems
Product Model	9447-1-24x
Product Name	OmniConverter GPoE+/SX 4x PoE+ 2x LC Single-Mode 12km US AC Powered
Package Type	Retail
Product Line	OmniConverter
Manufacturer Part Number	9447-1-241
Manufacturer Website Address	http://www.omnitron-systems.com
Environmentally Friendly	Yes
Environmental Certification	WEEERoHS
Country of Origin	United States
Package Contents	OmniConverter GPoE+/SX 4x PoE+ 2x LC Single-Mode 12km US AC Powered US Power Supply - 100-240Volt / 50-60Hz US AC Power Cord User Manual
Fiber Optic Cable Standard	9/125 µm
Media Type Supported	Twisted PairOptical Fiber
Fiber Mode Supported	Single-mode
Fiber Optic Wavelength	1300 nm
Ethernet Technology	Gigabit Ethernet
Network Technology	1000Base-T1000Base-LX
USB	No
DVI	No
Network (RJ-45)	Yes
Management Port	No
Number of PoE+ (RJ-45) Ports	4
Number of LC Ports	2
Total Number of Ports	6
Height	1.4"
Width	5"
Depth	6"
Form Factor	DesktopWall MountableRail-mountableStandalone
Weight (Approximate)	1.10 lb
Power Source	Power Supply
Limited Warranty	Lifetime