One Stop Systems Switch-based Cable Adapter, PCI Express x4 Gen 3 Host OSS-PCIE-HIB38-X4

PCIe cable adapters install easily into a computer's PCIe slot. A PCIe cable can then be plugged into the adapter to extend the PCIe bus from the motherboard to an external device, like an expansion enclosure or storage device. The PCIe x4 adapter has an 12-lane switch with built-in DMA controller and extends the PCIe bus at 32Gb/s with extremely low latency because there is no conversion software. The host adapter installs in the host computer's PCIe x4 I/O slot, allowing communication between the processor and multiple I/O points Insert the host cable adapter into a PCIe x4 in the host system slot. Make sure that the card is well seated and tighten the screw on the face plate. Attach the cable by inserting the cable into the slot and pushing on the metal tab to raise the metal pins. Release the metal tab ones the pins are aligned with the pin holes.

Product Type	PCIe Host Bus Adapter
Brand Name	One Stop Systems
Manufacturer	One Stop Systems, Inc
Product Name	Switch-based Cable Adapter, PCI Express x4 Gen 3 Host
Manufacturer Part Number	OSS-PCIE-HIB38-X4
Manufacturer Website Address	http://www.onestopsystems.com
Environmentally Friendly	Yes
Environmental Certification	RoHS
Card Height	Low-profile
Form Factor	Plug-in Card
Weight (Approximate)	2 lb
Host Interface	PCI Express 3.0 x4
Limited Warranty	2 Year