Peerless-AV HG Articulating Wall Arm PLA60-UNLP-GB

HG PLA60-UNLP-GB Articulating Wall Arm Includes:

• Mesh cord sheath
• Universal adapter plate
• 1 x Wall plate
• 1 x Tilt-roll assembly
• 1 x Arm assembly
• 1 x Wall support arm axle
• 3 x Vinyl trim
• 8 x Screw bolt (M10 x 1.5 x 15 mm)
• 1 x Nylon washer (0.505 x 0.75 x 0.062" )
• 1 x Tilt adjustment knob
• 1 x Carriage bolt (3/8"-16 x 3.25" )
• 2 x Delrin washer (1.525 x 2 x 0.062" )
• 1 x Socket Cap screw (#8-32 x 0.375" )
• 8 x Plastic finishing cap
• 1 x Holding pin
• 1 x Retainer plug
• 8 x Wood screw (5/16 x 3")
• 8 x Washer (0.250 x 1 x 0.068" )
• 1 x Allen wrench (9/64")
• 4 x Cable management clips
• 4 x Cable tie
• 1 x Polyester mesh sleeve (36")
• 1 x Allen wrench (6 mm)
• 1 x Adapter bracket
• 2 x Shallow adapter bracket
• 2 x Deep adapter bracket
• 1 x Allen wrench
• 8 x Anchor