AXIS Thermal Network Camera 0977-001 Q1941-E

Powerful performance for video analytics via ACAP applications Outstanding image contrast gives reliable detection and fast verification Easy and quick to install outdoors 384x288 thermal detection Product awards AXIS Q1941-E Thermal Camera was the recipient of Govies awards by Security Products Magazine 2016 in the Video Surveillance Cameras, IP category. Powerful video analytics of live or recorded video Thanks to its powerful processor, AXIS Q1941-E has high capacity for running video analytics via AXIS Camera Application Platform (ACAP) and can use a wide range of third party applications. The camera also offers a memory card slot for storing recordings locally. Reliable thermal detection with low rate of false alarms Since thermal cameras are less sensitive to problems with light conditions and shadows, they can achieve higher accuracy and less false alarms than conventional cameras in most applications. Thanks to a superb thermal image contrast, AXIS Q1941-E reliably detects and gives a fast verification of the situation, e.g. in perimeter surveillance. With five lens alternatives (7 mm, 13mm, 19 mm, 35 mm and 60 mm), the network camera can optimize detection performance to meet most application requirements. Smooth video and low storage requirements A thermal camera is mainly used for video analytics and detection in those restricted areas where no one should trespass or walk around. Based on these premises, the video shows no motion at all, unless an intruder is detected. Supporting Axis' Zipstream technology, AXIS Q1941-E filters out those areas with no motion, and it can focus on the parts of the image that are moving. This significantly reduces the bandwidth and storage required. Moreover, the Electronic Image Stabilization (EIS) helps the camera to provide a smooth live viewing when it is mounted on instable places and vibration can be perceived as an issue.

Product Type	Network Camera
Product Series	Q19
Brand Name	AXIS
Manufacturer	Axis Communications
Product Model	Q1941-E
Product Name	Q1941-E Thermal Network Camera
Manufacturer Part Number	0977-001
Manufacturer Website Address	http://www.axis.com
Maximum Video Resolution	768 x 576
Video Formats	H.264MPEG-4Motion JPEG
Maximum Focal Length	60 mm
Image Sensor Type	Microbolometer
Color Supported	Color
Network (RJ-45)	Yes
Remote Management	Yes
Connectivity Technology	Cable
HD Recording	No
Form Factor	BulletCabinetPole MountCorner MountPT MountWall MountCeiling Mount
Weight (Approximate)	4.90 lb