B+B RS-232 Data Tap 232CDT

On the Data Tap the male RS-232 connector on the top and the female RS-232 connector on the bottom are connected straight through, pin for pin. These connectors are used to connect the Data Tap in series with the RS- 232 line to be tapped. Either the Transmit Data from pin 2 or the Receive Data from pin 3 can be brought out to the Tap Connector. Pin 1, Protective Ground, and pin 7, Signal Ground, of all three connectors are interconnected.The small switch is used to program the Tap Connector. The bottom two switches pick Receive Data (RD) or Transmit Data (TD) to be sent to the Tap Connector. (See the markings near the switch.) When the RD switch is on, only mainline Receive Data is sent to the Tap Connector. When the TD switch is on, only mainline Transmit Data is sent to the Tap Connector. When both switches are on, both the Transmit Data and the Receive Data are sent to the Tap Connector.

Product Type	Data Transfer Adapter
Brand Name	B&B
Manufacturer	B&B Electronics Mfg. Co
Product Model	232CDT
Product Name	RS-232 Data Tap
Manufacturer Part Number	232CDT
Manufacturer Website Address	http://www.bb-elec.com
Weight (Approximate)	3.20 oz
Connector on First End	2 x 25-pin DB-25 Female RS-232 Serial
Connector on Second End	1 x 25-pin DB-25 Male RS-232 Serial
Adapter Type	Serial
Features	Data Tap
Limited Warranty	Lifetime