Edge-Core L3 Gigabit Metro Ethernet Switch ECS4660-28F

The Edge-Core ECS4660-28F is a standalone L3 Gigabit Metro Ethernet routing switch with 24 1000Base-X SFP slots, two 10G XFP uplink slots, and two 10G module slots that can support two additional 10G uplinks. With up 107Mpps performance, the ECS4660-28F is ideal for service provider aggregation deployment, providing wire-speed L2 switching and L3 unicast and multicast routing. To maintain high availability, the ECS4660-28F provides redundant power, a hot swappable fan tray, configuration rollback, and G.8032 ring protection.Key Features and Benefits High Availability With IEEE 802.1w Rapid Spanning Tree Protocol, the Edge- Core ECS4660-28F provides a loop-free network with redundant links to the core network and rapid convergence in less than 2 seconds. IEEE 802.1s Multiple Spanning Tree Protocol allows a spanning-tree instance per VLAN and Layer 2 load sharing on redundant links. The ECS4660-28F supports IEEE 802.3ad Link Aggregation Control Protocol (LACP). It increases bandwidth by automatically aggregating several physical links together as a logical trunk and offers load balancing and fault tolerance for uplink connections. The ECS4660-28F supports G.8032 Ethernet Ring Protection Switching, with the ability for the network to detected and recover from incidents without impacting users, meeting the most demanding quality and availability requirements. Rapid recovery time when problems do occur is as low as 50 msec. Comprehensive QoS The Edge-Core ECS4660-28F offers advance QoS for marking, classification, and scheduling to deliver best-in-class performance for data, voice, and video traffic at wire speed. Eight egress queues per port enable differentiated management of up to eight traffic types across the stack. Traffic is prioritized according to 802.1p, DSCP, IP precedence and TCP/UDP port number to provide optimal performance to real-time applications. Weight Round Robin (WRR) and strict priority ensure differential prioritization of packet flows and avoid congestion of ingress and egress queues. With bidirectional rate-limiting, per port or per traffic class, the ECS4660-28F preserves network bandwidth and allows full control of network resources. The ECS4660-28F supports Three Color Market and Policing single rate: Committed Information Rate (CIR) Two Rate: CIR+ Peak Information Rate (PIR) Traffic Policing: Drop or remark the priority tag of packets exceeds burst size. Advanced IPv4 and IPv6 Routing The Edge-Core ECS4660-28F supports hardware-based IPv4 and IPv6 routing for maximum performance. It provides a seamless migration path from IPv4 and IPv6 for future network upgrades and investment protection. Advance routing protocols such as RIP and OSPF provide dynamic routing by routing by exchanging routing information with other L3 switches or routes. Multicast routing is supported under independent multicast protocols, including PIM-DM and PIM-SM. DVMRP is also supported to interconnect two multicast-enabled networks across non-multicast networks. VRRP prevents your system from failing by dynamically backing up multiple L3 switches for routing.

Product Type	Ethernet Switch
Brand Name	Edge-Core
Manufacturer	Edge-Core Networks Corporation
Product Model	ECS4660-28F
Product Name	L3 Gigabit Metro Ethernet Switch
Manufacturer Part Number	ECS4660-28F
Manufacturer Website Address	http://www.edge-core.com
Manageable	Yes
Redundant Power Supply	Yes
Power Source	Power Supply
Ethernet Technology	Gigabit Ethernet10 Gigabit Ethernet
Media Type Supported	Optical Fiber
Network Technology	1000Base-X10GBase-X
Number of Total Expansion Slots	28
Number of SFP Slots	24
Expansion Slot Type	SFPXFP
Modular	Yes
Uplink Port	Yes
Stack Port	No
Port/Expansion Slot Details	4 x 10 Gigabit Ethernet Expansion Slot24 x Gigabit Ethernet Expansion Slot
Height	2.6"
Width	17.3"
Depth	10"
Form Factor	Standalone
Weight (Approximate)	10.25 lb
Limited Warranty	5 Year
Layer Supported	4