Kingston 8GB (1x8GB) DDR5 6000MT/s CL30 FURY Beast Black XMP KF560C30BB-8

Kingston FURY KF560C30BB-8 is a 1G x 64-bit (8GB) DDR5-6000 CL30 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 1G x 16-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Each module has been tested to run at DDR5-6000 at a low latency timing of 30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:FACTORY TIMING PARAMETERS Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V XMP Profile #1: DDR5-6000 CL30-36-36 @1.4V XMP Profile #2: DDR5-5600 CL40-40-40 @1.25V XMP Profile #3: DDR5-4800 CL38-38-38 @1.1VFEATURES Power Supply: VDD = 1.1V Typical VDDQ = 1.1V Typical VPP = 1.8V Typical VDDSPD = 1.8V to 2.0V On-Die ECC Height 1.37" (34.9mm), w/heatsink

Product Type	RAM Module
Manufacturer Part Number	KF560C30BB-8
Manufacturer Website Address	http://www.kingston.com
Manufacturer	Kingston Technology Company
Product Name	8GB (1x8GB) DDR5 6000MT/s CL30 FURY Beast Black XMP
Product Line	FURY Beast
Brand Name	Kingston
Environmentally Friendly	Yes
Environmental Certification	Hazard Assessment of Perfluorooctane Sulfonate (PFOS)
Environmental Compliance	Restriction of Hazardous Substances (RoHS) Waste Electrical and Electronic Equipment Directive (WEEE) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
Number of Pins	288-pin
Thickness	260.6 mil
Form Factor	DIMM
Length	5.3"
Width	1.4"
CAS Latency	CL30
Error Checking	Non-ECC
Number of Modules	1 x 8GB
Signal Processing	Unbuffered
Memory Speed	6000 MHz
Memory Size	8 GB
Memory Technology	DDR5 SDRAM
Memory Standard	DDR5-6000/PC5-48000
Memory Voltage	1.40 V
Memory Rank	Single-rank
Limited Warranty	Lifetime