Kingston 32GB (2x16GB) DDR5 6800MT/s CL34 FURY Beast Black XMP KF568C34BBK2-32

Kingston FURY KF568C34BBEAK2-32 is a kit of two 2G x 64-bit (16GB) DDR5-6800 CL34 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-6800 at a low latency timing of 34-45-45 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:FACTORY TIMING PARAMETERS Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V XMP Profile #1: DDR5-6800 CL34-45-45 @1.4V XMP Profile #2: DDR5-6400 CL32-39-39 @1.4V XMP Profile #3: DDR5-6000 CL30-36-36 @1.4VFEATURES Power Supply: VDD = 1.1V Typical Power Supply: VDD = 1.1V Typical VDDQ = 1.1V Typical VPP = 1.8V Typical VDDSPD = 1.8V to 2.0V On-Die ECC Height 1.37" (34.9mm), w/heatsink

Product Type	RAM Module
Manufacturer Part Number	KF568C34BBK2-32
Manufacturer Website Address	http://www.kingston.com
Manufacturer	Kingston Technology Company
Product Name	32GB (2x16GB) DDR5 6800MT/s CL34 FURY Beast Black XMP
Product Line	FURY Beast
Brand Name	Kingston
Environmentally Friendly	Yes
Environmental Certification	Hazard Assessment of Perfluorooctane Sulfonate (PFOS)
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS)
Number of Pins	288-pin
Thickness	260.6 mil
Form Factor	DIMM
Length	5.3"
Width	1.4"
CAS Latency	CL34
Error Checking	Non-ECC
Number of Modules	2 x 16GB
Signal Processing	Unbuffered
Memory Speed	6800 MHz
Memory Size	32 GB
Memory Technology	DDR5 SDRAM
Memory Standard	DDR5-6800/PC5-54400
Memory Voltage	1.40 V
Memory Rank	Single-rank
Limited Warranty	Lifetime