Perle PoE Injector 10040668 INJ 2113-T

INJ 2100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. In environments vulnerable to voltage surges, it acts as an intermediary devices between a non-PoE switch and a PoE device to injectfully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-2100-T units are protected against short circuits on the PoE side. The integrated surge protection increases system availability by protecting the connected end devices.Generating up to 60 Watts, the INJ-2100-T provides electrical power to remote PD access points,pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).Learn more about PoE.With the INJ-2100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

Product Type	PoE Injector
Manufacturer Part Number	10040668
Manufacturer Website Address	http://www.perle.com
Manufacturer	Perle Systems, Inc
Product Model	INJ 2113-T
Product Name	INJ 2113-T PoE Injector
Product Series	INJ
Brand Name	Perle
Certifications & Standards	IEEE 802.3bt IEEE 802.3at IEEE 802.3af EMC Directive 2014/30/EU CE-compliant EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-6 IEC 61643-21
Environmentally Friendly	Yes
Environmental Certification	REACH China RoHS
Weight (Approximate)	11.45 oz
Form Factor	Din Rail
Height	5.1"
Width	1.2"
Depth	4.7"
Product Color	Gray
Color Family	Gray
Input Voltage	24 V DC 48 V DC
Maximum Input Current	2.10 A
Maximum Output Power	40 W
Maximum Output Voltage	54 V DC
Protection Type	Surge Protection Over Current