Tripp Lite by Eaton 8-Outlets PDU PDUMNH15AT1

Single-Phase 15A ATS PDU Distributes and Monitors Network-Grade Power in Real TimeThis monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via its built-in network interface. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMNH15AT1 features eight NEMA 5-15R 120V outlets, which distribute AC power to rack equipment. Dual 12-foot (3.7-meter) power cords with NEMA 5-15P inputs connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources. Switches from Primary to Secondary Power Source in MillisecondsAutomatic transfer switching (ATS) allows the PDU to switch to the secondary source within 2-7 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source. Built-In LX Platform Network Management Card Allows Remote Access 24/7The Java-free HTML5-based WEBCARDLX network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. The latest version of PowerAlert Device Manager (PADM20) provides enhanced remote management capabilities, including customizable dashboard graphs to fit user preferences. The PADM20 upgrade and Tripp Lite's PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations. Digital Load Meter Helps Prevent Potentially Expensive OverloadsA digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low. Mounts into 1U of Rack Space or on a WallUse the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter. TAA-Compliant for GSA Schedule PurchasesThe PDUMNH15AT1 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product Type	PDU
Manufacturer Part Number	PDUMNH15AT1
Manufacturer Website Address	https://tripplite.eaton.com/
Manufacturer	Tripp Lite by Eaton
Product Name	8-Outlets PDU
Brand Name	Tripp Lite by Eaton
Management	Pre-installed LX platform interface provides remote monitoring via Java-free HTML5 web interface, telnet, SSH and SNMP management systems.
Package Contents	8-Outlets PDU Detachable C13 To NEMA 5-15P Secondary Input Cord, 12 Ft. (3.7 m) Configuration Cable Rack-Mounting Hardware Cable Retention Kit Owner's Manual
Country of Origin	Taiwan
Environmentally Friendly	Yes
TAA Compliant	Yes
Weight (Approximate)	11 lb
Mount Type	Rack-mountable Wall-mountable
Rack Height	1U
Height	1.8"
Width	17.5"
Depth	14.5"
Mounting Orientation	Horizontal
Input Voltage	120 V AC
Output Voltage	100 V AC 120 V AC 127 V AC
Input Current	15 A
Power Rating (Watt)	1520 W
Protection Type	Circuit Protection
Plug/Connector Type	NEMA 5-15P
Phase	Single Phase
Receptacle Type	NEMA 5-15R
PDU Type	Metered Auto Transfer Switch
Environmental Sensors	Water Temperature Humidity
Receptacle Detail	8 x NEMA 5-15R
Plug/Connector Detail	2 x NEMA 5-15P
Limited Warranty	2 Year